dwfisk
Quintessential Chatty Farker
I have a commission for a custom pit, a small (24' diameter X 36" long) RF offset with an insulated firebox that I'm trying to spec out. The client's desire is to minimize weight, cost and footprint for their patio (I've already suggested a vertical but the client doesn't think verticals "look right").
Here is my question: Do you think I can get away with 10-11 gauge (1/8 inch) for the inner box of a fully insulated (2" ceramic fiber) firebox? The outer shell will be the same 10-11 gauge (1/8" thickness).
Normally I would try to go with 1/4" for the inner box, but it is quite expensive in comparison to 10-11 gauge cut on a shear and I've started having really good success with 10-11 gauge on my verticals with an integral ash pan and fire basket like this one that keeps the really hot stuff away from the firebox walls by at least 1-1/2 inches:
Of course, the firebox would be designed for good airflow so they can use charcoal or splits; I usually try to hit about 115% of pit calculator recommendations after taking into account the fact that the lower portion of the firebox is taken up by the ash pan.
Any and all comments welcome. What say y'all?
Here is my question: Do you think I can get away with 10-11 gauge (1/8 inch) for the inner box of a fully insulated (2" ceramic fiber) firebox? The outer shell will be the same 10-11 gauge (1/8" thickness).
Normally I would try to go with 1/4" for the inner box, but it is quite expensive in comparison to 10-11 gauge cut on a shear and I've started having really good success with 10-11 gauge on my verticals with an integral ash pan and fire basket like this one that keeps the really hot stuff away from the firebox walls by at least 1-1/2 inches:
Of course, the firebox would be designed for good airflow so they can use charcoal or splits; I usually try to hit about 115% of pit calculator recommendations after taking into account the fact that the lower portion of the firebox is taken up by the ash pan.
Any and all comments welcome. What say y'all?
Last edited: