Shagdog
Quintessential Chatty Farker
- Joined
- Jul 1, 2013
- Location
- Grayslak...
I really don't have one, Sorry. I can give you some insight on how I made mine, but beyond that, I got nothin'.
Here's the thread on how I made mine, I don't see any reason why you couldn't do something similar. Just cut to length. A jig saw with a metal blade will get it done.
This is the flat metal I bought. Just order in the length you need.. I think mine were 24" and I cut 2" off...
http://www.speedymetals.com/pc-1711-8258-18-x-12-304-stainless-steel-annealed-pickled.aspx
Then I bought some of this rod to make the pins..
http://www.speedymetals.com/pc-1840-8270-18-rd-304-stainless-steel-cold-finished-annealed.aspx
Then you just need a little piece of plate. Doesn't have to be much.. Heck, you could probably use an old alum pan or something for the bottom...
Sorry, hope this helps
Here's the thread on how I made mine, I don't see any reason why you couldn't do something similar. Just cut to length. A jig saw with a metal blade will get it done.
This is the flat metal I bought. Just order in the length you need.. I think mine were 24" and I cut 2" off...
http://www.speedymetals.com/pc-1711-8258-18-x-12-304-stainless-steel-annealed-pickled.aspx
Then I bought some of this rod to make the pins..
http://www.speedymetals.com/pc-1840-8270-18-rd-304-stainless-steel-cold-finished-annealed.aspx
Then you just need a little piece of plate. Doesn't have to be much.. Heck, you could probably use an old alum pan or something for the bottom...
Sorry, hope this helps