dennisbrok
Knows what a fatty is.
- Joined
- Jan 31, 2015
- Location
- zeewolde
Well here we go then
First of all sorrie for my englich
ill try to keep it so everyone can reed it (im actually dutch)
Today was a good day to start my first smoker/UDS build
And i started with the heart of the monster the charkole box
i had these two stainless grills lying around
been laying in the grass somewhere in the yard for a few years
and where never cleaned before i threw them there
its about 7 mm so its gonna get heavy
so i used a cutting disc to cut the ends off
and i ended up with 34 dirty rods
how to clean these bad boys
i like making it easy so i clamped a power drill and put the rods in one by one cleaning them with sanding paper
after a few i was wandering what the hell i was dooing and why i diddend use new ones
just keep gooing dennis it will all be worth it you will see
and yes finually after i thing 2 life times and maybe 60 minutes
so here i had my rods nice and clean lets make something
started with making a circle on the work bench and placing rods in there for starters
Tig welded with 316L wire two overlaying rods
weld 3 rods together and bend it around for the circle (kinda)
added 15 cm rod standing up 36 times
weld a 2 mm by 20 mm strip of stainless to the top of that and added a handle to be able to pick it out of the uds
alsow added 8 cm legs under it to lift it up from the ground
Thinking about dooing a pizza tray or someting under it to catch the falling aches
So this in day one of the build
plan is to make the whole thing stainless 316
im getting a 200 L 55 gallon barrel from my moms work place where they trow there tings out every day
its been used for fich oil for the food industry so its gonna stink like fich for sure
but nothing a good power wach and burn wont get out
i already have the 3/4 threads 90 degree bents ballvalves and uprichts to make 3 inlets all 3/4
alsow ill be building a temp controller bij using a pid controller and a fan
and these will be incorperated in this build
so any ideas you guys have or if you see me make a mistake please comment and i can make the change if need be
this is my first build so lets hope all turns out well
thanks for reading and try and keep up
First of all sorrie for my englich
ill try to keep it so everyone can reed it (im actually dutch)
Today was a good day to start my first smoker/UDS build
And i started with the heart of the monster the charkole box
i had these two stainless grills lying around
been laying in the grass somewhere in the yard for a few years
and where never cleaned before i threw them there
its about 7 mm so its gonna get heavy
so i used a cutting disc to cut the ends off
and i ended up with 34 dirty rods
how to clean these bad boys
i like making it easy so i clamped a power drill and put the rods in one by one cleaning them with sanding paper
after a few i was wandering what the hell i was dooing and why i diddend use new ones
just keep gooing dennis it will all be worth it you will see
and yes finually after i thing 2 life times and maybe 60 minutes
so here i had my rods nice and clean lets make something
started with making a circle on the work bench and placing rods in there for starters
Tig welded with 316L wire two overlaying rods
weld 3 rods together and bend it around for the circle (kinda)
added 15 cm rod standing up 36 times
weld a 2 mm by 20 mm strip of stainless to the top of that and added a handle to be able to pick it out of the uds
alsow added 8 cm legs under it to lift it up from the ground
Thinking about dooing a pizza tray or someting under it to catch the falling aches
So this in day one of the build
plan is to make the whole thing stainless 316
im getting a 200 L 55 gallon barrel from my moms work place where they trow there tings out every day
its been used for fich oil for the food industry so its gonna stink like fich for sure
but nothing a good power wach and burn wont get out
i already have the 3/4 threads 90 degree bents ballvalves and uprichts to make 3 inlets all 3/4
alsow ill be building a temp controller bij using a pid controller and a fan
and these will be incorperated in this build
so any ideas you guys have or if you see me make a mistake please comment and i can make the change if need be
this is my first build so lets hope all turns out well
thanks for reading and try and keep up