speers90
is Blowin Smoke!
Finally got started with my 500 gallon reverse flow build. Started by securing a couple of out of service propane tanks, the 500 is for me and the 250 is for TTNuge.
Got started by laying out the frame. I was able to put some of that geometry I learned in high school to use! I might have had to google how to find the length of a triangle side by using a known length and the angle, but we won't tell anyone. Using 11 gauge, 2"x4" rectangle tube for the frame.
From there I blocked it up level and started welding, and I ended up with a rolling frame. I should mention I took the easy way out and just bought a complete, ready to install axle. I knew I wanted 46" spring centers, 3500# and electric brakes, I found a company out of Georgia that shipped it to me via UPS, all I had to do was pick it up at the shipping terminal to save on the shipping.
Here is some of the other materials I will be using as we progress through the build. First up is the reverse flow plate, that sucker is heavy! All the plate pictured is 1/4"
Firebox plate and a some miscellaneous plate for intake wheels and the exhaust cap. I got a good deal on the steel, caught a 4 hour 30% off sale, so I decided to have them precut all of the plate for me.
8" pipe for the exhaust.
Fenders
I decided I was going to spend a little money and get some entry level tools that would be needed to work with metal and do so in a somewhat efficient manner.
Picked up a Hobart 190 Mig Welder, running .035 wire with 75/25 mix
Along with a Northern Industrial (Northern Tool) plasma cutter, I am typically pretty leery of tools like this but the numerous reviews were so good that I decided that I would give it a try. I haven't done much with it yet, but I did source out some drag tips via ebay and hope to give it a try this week.
A cold cutting metal chop saw, I must say I was very intrigued by this so it was an impulse buy. Very happy with this purchase.
Auto darkening helmet, how did I ever get by without one of these?
Miscellaneous not pictured: new welding gloves, long sleeve welding shirt, clamps, flap discs, grinding wheels...
Got started by laying out the frame. I was able to put some of that geometry I learned in high school to use! I might have had to google how to find the length of a triangle side by using a known length and the angle, but we won't tell anyone. Using 11 gauge, 2"x4" rectangle tube for the frame.
From there I blocked it up level and started welding, and I ended up with a rolling frame. I should mention I took the easy way out and just bought a complete, ready to install axle. I knew I wanted 46" spring centers, 3500# and electric brakes, I found a company out of Georgia that shipped it to me via UPS, all I had to do was pick it up at the shipping terminal to save on the shipping.
Here is some of the other materials I will be using as we progress through the build. First up is the reverse flow plate, that sucker is heavy! All the plate pictured is 1/4"
Firebox plate and a some miscellaneous plate for intake wheels and the exhaust cap. I got a good deal on the steel, caught a 4 hour 30% off sale, so I decided to have them precut all of the plate for me.
8" pipe for the exhaust.
Fenders
I decided I was going to spend a little money and get some entry level tools that would be needed to work with metal and do so in a somewhat efficient manner.
Picked up a Hobart 190 Mig Welder, running .035 wire with 75/25 mix
Along with a Northern Industrial (Northern Tool) plasma cutter, I am typically pretty leery of tools like this but the numerous reviews were so good that I decided that I would give it a try. I haven't done much with it yet, but I did source out some drag tips via ebay and hope to give it a try this week.
A cold cutting metal chop saw, I must say I was very intrigued by this so it was an impulse buy. Very happy with this purchase.
Auto darkening helmet, how did I ever get by without one of these?
Miscellaneous not pictured: new welding gloves, long sleeve welding shirt, clamps, flap discs, grinding wheels...