landarc
somebody shut me the fark up.
- Joined
- Jun 26, 2009
- Location
- sAn leAnDRo, CA
Humboldt Grass-fed Beef, mostly at 225F, with an herb, garlic n olive oil paste slather
similar to above. 250F. Simply Marvelous sweet & spicy and slather as above
I really thought there should have been something like this by now, but for some reason my searches couldn't find it. This time of year there are many rib roasts being cooked and people asking advice on how to cook them. I am of the belief that a rib roast is one of the easiest things to cook. We see cooking temps typically range from 225* to 350* with people raving about the results, and I've even seen some posts with cooks going as low as 200* and as high as 425*. All of these posts claim excellent results and I believe them! Basically, you can't mess this up. Well, unless your remote thermometer fails, you fall asleep, your fire goes out or starts burning wildly out of control. But under normal circumstances, you're going to have a great product. I'm going to start this thread by posting some basic information on cooking, what I do, some reference material, and then leave it up to others to post pictures, recipes, etc.
My typical roast is quite simple. I usually cook a four-bone roast, ~7lbs. I take it out of the refrigerator an hour before the cook and let it come up to temp a bit on its own. I trim excess fat off the roast, because nobody in my family really likes to eat fat and when it is trimmed afterward, then the spices go along with it. The last roast I cooked, I trimmed just about the entire fat cap, yes, down to the meat. The results were excellent, but more about that later. I then rub the roast down with EVOO, coat with S&P, Montreal steak spice, Lawry's, parsley, Foil Hat Rub, or any combination of the above -- it doesn't matter, because it's going to be good. I then put the roast in my preheated (~225*) pit (lump with a chunk of oak) on a tray -- the same one in the picture below that I serve with. I cook this indirect on the Oval with diffusers in place. I put in a temperature probe, smack dab in the middle. Roughly 3 1/2 hours later (your times will vary), the IT has climbed to between 120*-130*. I aim for about 125*. I then remove the roast, tent foil, sometimes with a couple layers and cover with a towel. I've let them sit for an hour, but typically rest for 1/2 hour. They stay warm. The IT typically climbs about 10*, sometimes a bit more in this time. When I'm ready to serve, I open the vents on the pit (or use another pit), and bring the temp up to ~600*. I do a very quick sear, just a couple minutes along the cap and bones. The heat is just on the outside and I can slice this when I'm ready. Because of the low cooking temp (and rest), I get a very evenly cooked product. This may or may not be what you want.
I should note that after cooking, I trimmed the bones off for easy slicing!
Now for some background material:
Two great resources on prime rib and reverse searing are given by The Food Lab here:
http://www.seriouseats.com/2009/12/the-food-lab-how-to-cook-roast-a-perfect-prime-rib.html
http://www.seriouseats.com/2010/12/..._Newsletter_December_20_2010&utm_medium=email
While you will hear a lot about reverse searing on this forum, it is not essential. You can get a great product by just smoking or roasting. I personally like the crusty edge, but that is my preference and it may not be yours.
What's the deal about cooking temperature? They are all over the place. Essentially, this means you can't mess it up. Just about any temperature you pick, you will end up with a great product. That doesn't mean that it will be the same product though. Here is an illustration of the differences in the final product due to different cooking temperatures:
Essentially, it comes down to how even you want it, and especially how done do you like that cap. The cap is juicy and there is nothing wrong with eating it well done. Notice also that Ron_L does not sear his meat.
How about cooking times? Thirdeye has compiled a list of cooking times for roasts. I'm going to cut and paste that here. Hopefully, he'll be able to update this list with new data.
I just want to comment that there are a lot of factors in these times, not only the kind of pit you have, but I believe also, how the roast is trimmed. I have found that my roasts have been cooked consistently in about 3 1/2 hours. The last one I did in which I trimmed all of the fat cooked in only 2 1/2 hours. I am assuming that is because this insulating layer has been removed -- ask any duck, fat is a great insulator. This certainly is an anomaly in the above dataset for a ~ 7lb roast.
Post your comments, pics and recipes, please!
We had a very Merry Christmas at our house. My Mom and Dad came and ate with the six of us - Mrs Q, the baby Qs and me.
While the shrieking and paper explosion were in full gear, I stepped into the kitchen and put one part course salt, one part extra coarse black pepper and one part montreal steak on the exterior of a standing rib roast that had been ageing in the fridge since Saturday.
After we all enjoyed the last of our presents, I stepped outside and fired off the WSM with one full lit chimney of Kingsford and one full chimney of unlit. The smoker went up into the 300s and I put the meat on (about a 5 1/2 pound, 3 bone roast).
After an hour and a half the internal temperature was in the mid 90s. The WSM temp was around 350 and all was well. A shot at the 90 minute mark.
After another 30 minutes the internal temperature was in the 110s. I took the smoker apart and put the grill grate directly on the charcoal ring. I wanted to make sure we had a good exterior crust. I didn't char it, just a good sizzle. After finishing that exercise, I put the smoker back together and put the roast back in.
Pulled it at and internal temp in the low 120s and let it rest 20 minutes while we rounded up the family and served the mashed potatoes, squash casserole, fruit salad and rolls.
Mrs Q was kind enough to get a shot of the slicing. There was enough for everybody and for y'all too. (please use this photo)
A very Merry Christmas to you all from Houston, Texas USA. Thanks for all your kindness and friendship over the years.
Thanks for bringing up this post. A wealth of information here. For those of you that have a Publix in your neighborhood, they have rib roasts on sale through Christmas for $6.49/lb.
Bump for a fantastic and timely post... :thumb: