Backwoods chubby 3400 cart options

[clydegator]

I just ordered a backwoods chubby 3400. Looking for ideas for a cart to raise it up to a useable height. Also needs to have wheels to move around easily. I’m thinking a stainless steel table with castors might work. The smoker is only 30 inches tall and the optional casters only add 6inches of height. That’s way too low for me! I’m also considering a small tool chest as an option.

 

[Twangzer Mike]

Might depend how far you need to roll it and over what terrain. Could be a Heavy duty Gorilla Cart or an Instrument cart. I'd worry about it being top heavy with the potential to tip. Anchor the legs ? The higher it is ... the more the tip over issue unless it's pretty wide. Good luck

 

[Maylar]

I have a Vevor stainless cart for my Ninja Woodfire grill/smoker -

https://www.vevor.com/stainless-steel-work-table-c_10625?utm_source=google&utm_medium=cpc&utm_id=20784394930&utm_term=vevor%20stainless%20table&gad_source=1&gclid=Cj0KCQiAsvWrBhC0ARIsAO4E6f80RCKtWB6gL_BdhNtpJm3oqJQYS4Ai92qFJj1yChLBj-QajS4zEHIaAp1HEALw_wcB

Whether the castors are big enough for you depends on the surface. I have a wooden deck and they're fine.

 

[Colorado0321]

Some lumber and screws is all you really need. Add in some 3" casters and foldable brackets from amazon, and you're set!

 

[Maylar]

Some lumber and screws is all you really need. Add in some 3" casters and foldable brackets from amazon, and you're set!

I've done that too. And neglected to use pressure treated material and paint: