PitPopmaster T Need Help with UDS Brisket LOw and Slow - Page 4

Bludawg · 01-20-2013, 11:51 AM

If' you have to baby sit it your not doing something right. I set mine and walk away the only time I have a big temp flucation is when it is running out of fuel at about 20 hrs up or down 10 is tolerable over the course of a cook.

Pitmaster T · 01-20-2013, 12:25 PM

Quote:

Originally Posted by Bludawg

If' you have to baby sit it your not doing something right. I set mine and walk away the only time I have a big temp flucation is when it is running out of fuel at about 20 hrs up or down 10 is tolerable over the course of a cook.

Don't get me wrong... my UDS is spot on as far as I can tell where the therm is.... 210 when I set it at 8:30, 208 when went to bed, 207 when I woke up at 4, cranked it to 230.... near that range at 8 in the am.

Still holding now at 170-180 with the briskey in it.

So the only reason I was up was because Phil said it would be ready. It wasn't ... I had it set that low because I was worried about temp versus being over the fire, so.... it wasn't ready, but I am damn sure glad I think I wrapped it as it may have dried a bit. I need a stack.

jonboy · 01-20-2013, 12:47 PM

What was the black glue you used in the first video?
jon

bigabyte · 01-20-2013, 12:49 PM

Why the fark didn't you jsut put it in the farking microwave?

---k--- · 01-20-2013, 12:50 PM

Why the fark does your UDS have two ball valves? Sounds like someone didn't stick the the plans.

Rich Parker · 01-20-2013, 01:20 PM

I wish Donny 2011 would come back... Please destroy that drum before you ruin it for everyone else.

Pitmaster T · 01-20-2013, 01:37 PM

Quote:

Originally Posted by jonboy

What was the black glue you used in the first video?
jon

3 parts Molassas, one part soy, one part Ballistic Vinegar.

Spell check made that ballistic instead of Balsamic.... i like it like that.

i brush my birds with that near the end.... turkeys too.... for that Italian look.

Shizzles thread a while back made me think upon it... not bad drizzled on some good quality ice cream either sans the soy and reduced.

Bludawg · 01-20-2013, 01:38 PM

Trade Double Secret Probation Proprietary Info. Pitmaster "T" eyes only! Lay a strip of foil on the grate before placing the Butcher Parcel on the grate.

Pitmaster T · 01-20-2013, 01:39 PM

Quote:

Originally Posted by ---k---

Why the fark does your UDS have two ball valves? Sounds like someone didn't stick the the plans.

yes 98 bucks worth of ego ...lol it also allows me to closer control my higher temps.

jasonjax · 01-20-2013, 02:29 PM

Posts like this remind me how much I love my pellet poopers.

Pitmaster T · 01-20-2013, 02:31 PM

Quote:

Originally Posted by jasonjax

Posts like this remind me how much I love my pellet poopers.

Wide open my UDS fires up to 470... oddly the old paint is not burned off.

jasonjax · 01-20-2013, 02:57 PM

Quote:

Originally Posted by Pitmaster T

Wide open my UDS fires up to 470... oddly the old paint is not burned off.

Indeed. Wide-open my PP hits 900* and since it is stainless steel no burnt off paint.......

However, I imagine I'd spend a lot of dough in operating costs like repaints before I'd catch up to my capital investment delta.

However, good sleep at my age is priceless.

Maybe I'll get a stick-burner when I retire.

Q-Dat · 01-20-2013, 03:51 PM

So are you actually gonna eat this thing at some point? :p

Pitmaster T · 01-20-2013, 05:22 PM

Quote:

Originally Posted by Q-Dat

So are you actually gonna eat this thing at some point? :p

To, jasonjax.... did I say 450... uh.. I meant 1450 degrees. No, I have ONLY two holes and plan to add that third so I think it will go higher with a third hole. I assume you have four 3/4?

Now to the brisket itself. Mom and I just ate it. We used to have this tradition we are starting again. I make a meat dish and she goes and buys some sides. Relaxing and stress free for all of us.

UDS - Brisket Cut Up - YouTube

The results are peculiar for my first UDS brisket. I had to rest it a long time due to my serving time and perhaps should have taken it out of the "heated rest" an hour or two earlier for some people's texture standards but I liked it. NO SMOKE ring and I am not sure what that was about as it went in cold, and smoked for at least 4 hours at 207. No part was burned like I thought it would be. It was moist. So.... the only weird thing was no smoke ring. A few things I can tweak but as you can see, still has my trademark jiggle. The fat was like my usual way.... defined by many as "BBQ Meat Mayonnaise."

Boshizzle · 01-20-2013, 06:32 PM

Looks pretty good to me! Nice job with that UDS!

01-20-2013, 11:51 AM	#46
Bludawg Babbling Farker Join Date: 07-04-09 Location: Jonesboro,Tx Downloads: 0 Uploads: 0	If' you have to baby sit it your not doing something right. I set mine and walk away the only time I have a big temp flucation is when it is running out of fuel at about 20 hrs up or down 10 is tolerable over the course of a cook. __________________ I never met a Cow that I didn't like with a little Salt & Pepper! Certified PORK-A-HOLIC

01-20-2013, 12:49 PM	#49
bigabyte somebody shut me the fark up. Join Date: 05-10-06 Location: Overland Fark, KS Downloads: 1 Uploads: 1	Why the fark didn't you jsut put it in the farking microwave? __________________ Chris Baker For great food and and an even better time join the BBQ Brethren Throwdowns *First ever recipient of the Silverfinger Award!* Yes, I own a whole bunch of BBQ crap also. *Certified MOINK Baller & IMBAS Certified MOINK Ball Judge #0003 - Get your MOINK Certification today!* The Secret Squirrel Society doesn't exist - Zero Club member

01-20-2013, 12:50 PM	#50
---k--- is Blowin Smoke! Join Date: 09-07-10 Location: Chicago, IL - West burbs Downloads: 3 Uploads: 0	Why the fark does your UDS have two ball valves? Sounds like someone didn't stick the the plans. __________________ -Ryan Proudly Smoking on a UDS, PBC & Accidental Winner of the 2012 "Saucy" Throwdown.

01-20-2013, 01:20 PM	#51
Rich Parker Babbling Farker Join Date: 06-20-09 Location: Grand Rapids, MI Downloads: 0 Uploads: 0	I wish Donny 2011 would come back... Please destroy that drum before you ruin it for everyone else. __________________ WSM and UDS - iBQ'n BBQ Team owner TheBBQSuperstore.com

01-20-2013, 01:38 PM	#53
Bludawg Babbling Farker Join Date: 07-04-09 Location: Jonesboro,Tx Downloads: 0 Uploads: 0	Trade Double Secret Probation Proprietary Info. Pitmaster "T" eyes only! Lay a strip of foil on the grate before placing the Butcher Parcel on the grate. __________________ I never met a Cow that I didn't like with a little Salt & Pepper! Certified PORK-A-HOLIC

01-20-2013, 12:47 PM	#48
jonboy is One Chatty Farker Join Date: 01-14-07 Location: Mount Washington, Kentucky Downloads: 0 Uploads: 0	What was the black glue you used in the first video? jon

01-20-2013, 02:29 PM	#55
jasonjax is one Smokin' Farker Join Date: 12-20-07 Location: Jax, Fl. Downloads: 0 Uploads: 0	Posts like this remind me how much I love my pellet poopers.

01-20-2013, 03:51 PM	#58
Q-Dat Babbling Farker Join Date: 12-03-08 Location: Pearl River LA Downloads: 0 Uploads: 0	So are you actually gonna eat this thing at some point? :p

01-20-2013, 06:32 PM	#60
Boshizzle somebody shut me the fark up. Join Date: 01-26-10 Location: Virginia Downloads: 0 Uploads: 0	Looks pretty good to me! Nice job with that UDS! __________________ Jambo Pit - UDS - Lang 60 (Sold) 18.5" & 22.5" Weber Kettles - Smokey Joe and Mini-WSM - Bubba Keg - #2 La Caja China Chargriller Outlaw Impeccably Accurate BLACK & RED Thermapens KCBS CBJ Operation BBQ Relief Founding Member I am Obsessive Compulsive about BBQ. Google it.