View Single Post
Old 06-15-2016, 05:18 PM   #5
jpbsarris
Knows what a fatty is.
 
Join Date: 12-30-12
Location: Linton, Indiana
Default

All LP grill regulators run at the same pressure, 11 water column inches. The newer ones just have a different hose connector for the new tank valves. You don't want to mess with the regulator setting (most are not adjustable anyway). You can tweak the BTU output quite a bit by drilling out the burner orifice. You can usually increase the orifice size by a couple of drill sizes with tiny numbered drill bits. Just go one size at a time until you get a bigger flame and don't go too big. You will have to adjust the air mix at the burner tube as well until you get a nice steady blue flame. I have changed many burner orifices on Webers to increase the BTU output.
jpbsarris is offline   Reply With Quote


Thanks from:--->